Click on the image to check the artwork
Parameters:
Model |
LHLM-1A |
Cross Beam Length |
4m |
Longitudinal Rail Length |
6m |
Effective Cutting Width (X axis) |
3.2m |
Effective Cutting Length (Y axis) |
4.5m |
Cutting Mode |
Flame only; Plasma only,Flame and Plasma |
Drive Mode |
Dual-side |
Drive Method |
Rack and pinion drive for X and Y axes |
Flame Cutting Thickness |
6-200mm |
Plasma Cutting Thickness |
1-60mm (according to the specification of plasma power source) |
Cutting Speed |
0-3500mm per minute |
Moving Precision |
0.01mm per step |
Power Source |
220V 50Hz 500-1000W |
Cutting Gas |
Acetylene, Propane |
Plasma Gas |
Pressed air, Oxygen, N2 |
Nesting Software |
INTERGNPS, FASTCAM |
Torch Height Controller (AUTO) |
CHC600(Capacitive height control for flame cutting) |
PHC330(Arc voltage height control for plasma cutting) |
Cutting sample:
